The BMW X5 showed up around 1998 and has captured our
interest ever since. It is a beautiful
addition and a bold move from BMW at the time and since have added two smaller
SUVs to the production line. But like any other mechanical equipment,
maintenance is a part of life and every now and then there are break downs that
need to be addressed.
From its release to 2002 and some 2003 the transfer case
used was the NV125. The NV stands for New Venture or also referred to in the industry
as New Process.
After many years of selling parts for this transfer case we
know the chain is a part that should be replaced whenever you have to go into
the unit. And there are three other parts that should also be replaced which
are the chain snubber, the plastic washer and the plastic caged bearing. These
are wear parts and always a good idea to replace while in the unit.
If you try to purchase any parts from the dealer they will
tell you that you need to replace the complete transfer case or as it is known
in other parts of the world, the transfer box.
But with Cobra you have options. You can rebuild it yourself
or purchase a remanufactured one from us, either way you choose the best option
for you.
Our remanufactured NV-125 comes with new seals, bearings,
chain, plastic washer, plastic caged bearing, snubber and hard parts are
carefully inspected for optimum results and customer satisfaction. We would not
sell a remanufactured unit we wouldn’t put in our own vehicle.
Posts
No comments:
Post a Comment