Mitsubishi and Chrysler Manual Transmission F5M33, W5M61, W6MG1...

The F5M33 standard transmission is a 5 speed front wheel drive (FWD) unit used in the Dodge Stealth and Mitsubishi 300GT with the 3.0L engine. It is also used int the 2.0 liter Turbo Eclipse, Laser and Eagle Talon. This is the two wheel drive unit and not the all wheel drive (AWD). This unit's case is usually stamped with " F5M332 ".

The W5MG1 is a 5 speed AWD standard the 3.0L 300GT and Stealth with the 12 bolt aluminum cover. Its transfer case is unique to this unit as it is a 6 speed.

There are some differences in parts for these units. Here are some.

The synchro, bearing, gasket and seal kits are different for each unit. When ordering the kits with synchros or the synchro kit by itself more information is needed on the unit for the proper kit. Please contact us for more information.

The counter shaft bearing is the same for the 5 and 6 speed and it is different for the rear one. The center differential bearing cap transmission used in the 3.0L Stealth and 3000 GT. This unit has a 12 bolt aluminum cover. Transfer cases for the AWD from 1990 to 1992 are equipped with a 35mm tapered input front bearing and from 1992 and up it measures 38mm.

The W6MG1 is a 6 speed AWD standard transmission, the center differential cap bearings are 58mm and 35mm. Three different sizes are available for the differential bearing: 68, 75 or 80 millimeters. The tapered input bearing is either 35 or 38mm.

(Getrag Design,)